Go to our HOMEPAGE Go to our HOMEPAGE See our LIMOUSIN Range See our PROVENCAL range See our TERRACOTTA WINERACKS See our range of easy-to-install GLASS BLOCKS See our hand-sculptured COPPER RADIATORS Infinate design possibilities with our range of MOSAICS See our huge variety of FLOORING TILES ANTRAD location maps, e-mail, on-line enquiry forms and other contact details

Job
 Opportunities

Home
Page
Limousin
Range
Provencal
Range
Wine
Racks
Glass
Blocks
Copper
Radiators
Mosaic
Tiles
Flooring
Tiles
Contact
Details

Blockup glass block wall Glass Block Wall Assembly Instructions
For more information on our range of glass blocks, click here to contact us
 
   
Click here for a printer friendly version

Glass block frame kit

 

BlokUp comes Flat Packed, and is easily portable.


First unpack and identify all contents. This includes:

  • sides and tops.
  • cartridges of Silicone bond and silicone grout.
  • sponge and screws.
  • horizontal and vertical seperation plates.
  • glass blocks
  • easy to follow instructions

 

glass block wall kit contents


tools needed for building a glass block wall using the blokup system

 

You will need some basic tools. These include:

  • screwdriver.
  • drill.
  • level.
  • bucket of water (for washing down the panel).

Then simply slot the frame together.

 

stage 1 of building your glass block wall


 

Secure the corners with the screw provided.
(Note: image shows older version which required a rivet gun; this is no longer the case.)


Fix the completed frame into position, with a drill and screws, to the walls, floor and ceiling as required.

 

Stage 3 of building your glass block wall


Stage 4 of building your glass block wall

 

You are now ready to start installing the glass blocks within the frame. Apply lines of clear silicone bond to the frame beside and under the first glass block. Push firmly into place.


Apply silicone bond to the side of the glass block and fix the large aluminium strip to the side of the glass block. For the first course, this strip sets down into the opening in the frame.

 

Stage 5 of building your glass block wall


Stage 6 of building your glass block wall

 

Continue along the first course. Apply silicone bond along the top of the first course. Then fit the long aluminium strip on top ensuring it fits into the slots on both sides of the frame.


Continue building with silicone bond, aluminium separation plates and glass blocks.

 

Stage 7 of building your glass block wallStage 8 of building your glass block wall


Stage 9 of building your glass block wall

 
Apply silicone grout to the panel and smooth joints with a damp sponge.

And there you are! It's that easy to build a glass block wall with blockup glass block wall

 
   
Click here for a printer friendly version

click here to launch antrads glass block wall designer

Index



 

Glass Blocks

© ANTRAD 2004. Last updated 07 July 2004. Click here to read our disclaimer
Site maintained by behindthestorm.com